Table of Contents
Advertisement
Music Shield User Manual
1)
Copy some audio files to the root directory of a TF card and insert it into the TF socket of a Music
Shield.
2)
Connect the development board to a PC.
3)
Unzip the demo files to the directory of Arduino software: ..\arduino\libraries.
4)
Run Arduino software and click File --> Examples --> MusicPlayer --> MusicShield to open the
demo. Compile (click
5)
Run the serial monitor software (PuTTY, SecureCRT, Arduino Serial Monitor, etc.) Set the
software as: Baud: 115200, Data bits: 8, Stop bits 1; Parity: None, Flow control: None.
6)
Plug in an earphone and you will hear the music. Press the Up/Down button to adjust the
volume and Left/Right button to select the title. Press the Middle button to play or pause.
Meanwhile the Serial Monitor software will print:
---- songs in TF card (root dir) ----
RECORD~1.WAV
TEST.ACC
TEST.MP3
TEST.OGG
TEST.WAV
TEST.WMA
Playing RECORD~1.WAV
[done!]
Playing TEST.WAV
2.
MIDI (SD card is not required under Real-Time MIDI)
1)
Connect the development board to a PC,
2)
Run Arduino software and click File --> Examples --> MusicPlayer --> MusicShield to open the
demo. Compile (click
3)
Run the serial monitor software (PuTTY, SecureCRT, Arduino Serial Monitor, etc.) Set the
software as: Baud: 115200, Data bits: 8, Stop bits 1; Parity: None, Flow control: None.
4)
Plug in an earphone and you will hear the beautiful MIDI music. Meanwhile the Serial Monitor
software will print:
Init vs10xx in MIDI format...done
Fancy Midi Sounds
Instrument: 30
N: 27
N: 28
N: 29
N: 30
Revision 1.1. Date: December 7, 2015. Author: W. L. Yan. Editor: Felix.
, Verify) and program (click
, Verify) and program (click
share awesome hardware
, Upload) it.
, Upload) it.
11
Advertisement
Table of Contents
