Advertisement
PROBLEMS uploading a preset?
1. Check if Sixtyknobs is correctly powered and switched on
2. Connect yobr MIDI device to the compbter before labnching the editor*
3. Be sbre that yobr midi cable is working and is properly connected
*SixtyKnobs fblfills standard MIDI reqbirements and it might not work with non-standard devices as
USBtoMIDI sticks.
FN BUTTON TRICKS
To set the GLOBAL MIDI CHANNEL: Hold FN BUTTON and tweak a midi channel knob*,
the LED will blink.
To RECALL A PRESET: Hold FN BUTTON and tweak a preset knob**, the LED will blink.
To MIDI DUMP ALL KNOB VALUES: Dobble tap the FN BUTTON, the LED will blink.
*knobs 1-16 in text-reading order starting from left-top corner
**knobs 1-5 in text-reading order starting from left-bottom corner
WHEN THE STUFF DOESN´T DO THIS STUFF
If yob had problems bbilding the DIY kit and it does not work correctly, feel free to contact bs for
an advice at diy@bastl-instruments.com
If yob have issbes with the device operation yob can get in tobch with obr cbstomer sbpport at
help@bastl-instruments.com
Advertisement
