Table of Contents
Advertisement
Monobloc Outdoor Unit
7.0 ESTIA Monobloc Outdoor Unit Installation
Cautions
• Install the Monobloc outdoor unit in a location that meets the following conditions after the customer's consent
has been obtained:
• A well ventilated location free from obstacles near the air intakes and air discharge
• A location that is not exposed to rain or direct sunlight
• A location that does not increase the operating noise or vibration of the outdoor unit
• A location that does not produce any drainage problems from discharged water
• Do not install the outdoor unit in the following locations:
A location with a saline atmosphere (coastal area) or one that contains sulphide gas (hot spring area)
•
as special maintenance is required
A location subject to oil, vapour, oily smoke or corrosive gases
•
A location in which organic solvent is used
•
A location where high frequency equipment (including inverter equipment, private power generator,
•
medical equipment and communication equipment) is used. Installations in these locations may cause
malfunction or the air to water heat pump, abnormal control or problems due to noise from such
equipment
•
A location in which the discharged air of the Monobloc outdoor unit blows against the window of a
neighbouring house
A location where the operating noise of the Monobloc outdoor unit is transmitted through other
•
structures
A location where drain water poses any problems
•
•
When the outdoor unit is installed in an elevated position, be sure to secure the unit using the feet
attached to the unit
Safety Considerations
• Be sure you understand and follow the procedures and safety precautions contained in the instructions
supplied with the machine, as well as those listed in this guide, such as: protective clothing – gloves, safety
glasses, safety shoes, appropriate tools etc.
12
Installation Manual
Hide quick links:
Advertisement
Table of Contents
