Advertisement
How to Use
Trimming Beards
To Define the Beard Line
Creating the "Stubble Look"
■ Before you begin, comb your hair
■ Remove Adjustable Comb.
■ Adjustable Comb should be on
in the direction that it grows so
■ Hold trimmer vertically with cutting
and set to position 1 (1.5 mm) or
that the hairs are at their maximum
2 (2.5 mm).
blades facing you.
height and facing in the same
■ Start with edge of beard line. With
■ Hold trimmer horizontally with the
direction.
the cutting blades resting lightly
cutting unit facing either up or
■ Determine how much hair you want
against your skin, use motions
down.
to cut and position the hair length
towards edge of beard line to trim
■ Trim hairs using an upward or
selector accordingly. Remember,
it to desired location in facial area
downward motion against or
until you are familiar with using the
and away from beard in neck area.
with the direction of hair growth,
trimmer, it is always better to select
whichever is preferred.
a longer hair setting initially in order
■ For trimming in tight spots or small
■ For an even closer "stubble look,"
not to trim too much hair.
areas attach Goatee Blade.
remove the Adjustable Comb and
repeat the previous two steps
To Trim the Beard's Hair Length
using the Stubble Blade.
■ Make sure Adjustable Comb and
Beard Blade is on.
To Trim Sideburns
■ Turn the trimmer so the front of the
■ Comb sideburns following the
cutting unit (Zoom Wheel side) is
direction of your hair growth.
facing away from you.
■ Be certain Adjustable Comb
■ Start trimming under your chin and,
attachment is on.
following your jawbone line, work
toward your ear and upper beard
■ Hold trimmer vertically with front of
line using an upward motion. Allow
trimmer facing you.
the Adjustable Comb to follow the
■ Trim sideburns using a downward
contours of your face. You may trim
motion.
either against or with the direction
of beard growth, whichever is
preferred.
Cleaning and Maintenance
Trimming the Nape of Your Neck
Cleaning and Maintaining
Troubleshooting
■ You will need a hand mirror for this
Your Trimmer
The trimmer does not work when
operation if performing it alone. The
turned on:
Clean your trimmer regularly to
mirror is not necessary if trimming
ensure that the unit's operating life
■ Trimmer must be charged for a
is performed by a second person.
is not prematurely shortened.
full 4 hours initially.
■ Remove the adjustable comb: the
■ Unplug adapter from wall outlet
Trimmer cutters do not move:
beard blade or stubble blade may
and insure that your trimmer is
■ The cutting unit may be dirty and
be used.
turned off.
clogged. Clean the unit as directed in
■ Use your fingers to lift the hair at
■ Do not use liquid cleaners on
Cleaning & Maintenance section.
the base of your head up off the
the cutters or harsh or corrosive
Trimmer does not hold charge:
neck. Your index finger should be
chemicals on the unit's main body.
■ Fully discharge battery by running
covering the roots of the hairs you
■ Remove Adjustable Comb. Tap or
trimmer until it stops; then follow
are lifting to prevent accidental
blow out any excess hairs that
recharging instructions (see section
removal by trimmer.
may be on the comb.
on "Operating Your Trimmer").
■ Using your other hand, hold the
■ Use cleaning brush to brush away
trimmer horizontally to the base
excess hair clippings from trimmer
of your neck with the cutting unit
blade.
facing up, and move the trimmer
■ The removable blades and
along the length of the neck
trimmer body can be rinsed under
until the unit touches your finger
water. Rinse blade and/or body
covering the hair roots at the base
under warm running water for
of your head. Repeat this procedure
several seconds, making sure hair
for the entire area of the neck. Be
debris is removed. Dry any excess
sure to move the unit slowly when
water that may remain on blade
performing this operation and to
before reattaching. See "Quick
keep the hair roots at the base of
Release Blades" for information on
your head out of the way of the
detaching and reattaching blade
trimmer.
assembly.
■ Use the hand mirror to inspect the
■ If blade is rinsed, it is
results of the operation and ensure
recommended to add 1 or 2 drops
all hairs along the nape of the neck
of sewing machine oil to the blade.
have been trimmed.
Performance Guarantee
Battery Removal and Disposal
Battery Disposal
Limited Two-Year Warranty
This trimmer contains two Lithium Iron Phosphate (LiFePO
) batteries. These
Spectrum Brands, Inc. is a global
4
batteries must be disposed of properly and responsibly according to your state and
consumer products company with
local regulations.
a diverse portfolio of world-class
brands, including Remington-
branded electric shavers. Spectrum
Battery Removal Instructions
Brands, Inc. warrants this product
1. Remove the blade cartridge from the trimmer.
against any defects that are due to
faulty material or workmanship for
2. Remove the 4 screws from the back side of the trimmer body.
a two-year period from the original
3. Pry apart the two halves of the trimmer body to expose the internals.
date of consumer purchase. This
4. With the top half of the trimmer body removed and the internals facing upward,
warranty does not include damage to
pull the end of the charge port upward to release the battery enclosure.
the product resulting from accident
5. Cut the red and black wires which lead into the battery enclosure
or misuse.
6. Pry up the small plastic plate on the end of the battery enclosure that the red
If the product should become defec-
tive within the warranty period, we
and black wires lead into and move it out of the way
will replace it free of charge. Return
7. Remove the 2 screws from the end of the battery enclosure
your product and sales receipt with
8. Pry off the battery enclosure end cap
your name, address and day time
9. Pull firmly on what remains of the red and black wires to remove the batteries
phone number to: Remington Returns
and circuit board from the battery enclosure
Center, 507 Stokely Dr., P.O. Box 1,
Deforest, WI 53532. For more infor-
10. Firmly pull the individual batteries away from the circuit board to remove them
from the circuit board and better expose the red and black battery leads.
mation call 800-736-4648 in the US
or 800-268-0425 in Canada.
11. Cut the remaining red and black battery leads to fully disconnect the batteries
12. Dispose of the batteries safely and responsibly according to your state and local
regulations and to the warnings section of this instruction book
U.S. residents: To order accessories call 800-392-6544, visit
www.RemingtonProducts.com, or visit your local retailer.
Canadian residents: To order accessories, please call 800-268-0425, visit
www.RemingtonProducts.com, or visit your local retailer.
KEEP ORIGINAL SALES RECEIPT
SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL,
AS PROOF OF PURCHASE FOR
SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
WARRANTY PURPOSES.
PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO
IM PLIED WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE LIMITED IN
This warranty does not cover prod-
DURATION TO TWO YEARS FROM DATE OF ORIGINAL PURCHASE.
ucts damaged by the following:
This warranty gives you specific legal rights and you may also have other rights
■ Accident, misuse, abuse or
alteration of the product
which vary from state to state or province to province. Some states do not allow
the exclusion or limitation of incidental, special or consequential damages.
■ Servicing by unauthorized persons
■ Use with unauthorized accessories
Spectrum Brands, Inc. Money-back Offer
■ Connecting it to incorrect current
and voltage
If within 30 days after you have purchased your Remington
®
branded product,
you are not satisfied and would like a refund, return it with the sales slip
■ Wrapping cord around appliance
indicating purchase price and date of purchase to the retailer from whom it was
causing premature wear and
purchased. Spectrum Brands, Inc. will reimburse all retailers who accept the
breakage
product within 30 days from the date of purchase. If you have any questions
■ Any other conditions beyond our
concerning the money-back guarantee, please call 800-736-4648 in the US or
control
800-268-0425 in Canada.
No responsibility, obligation, or liabil-
Remington Guarantees Satisfaction After 30 Days!
ity is assumed for the installation or
maintenance of this product.
Remington Men's Shave and Groom 60-Day Money Back Guarantee*
If within 60 days after purchasing any Remington
®
branded Men's Shave and
Groom product, you are not completely satisfied and would like a refund, return
it with the original dated sales receipt directly to Remington and receive a full
refund.** For questions concerning the money-back guarantee, please call
800-736-4648 in the US or 800-268-0425 in Canada.
*Applies to US and Canadian customers' returns only.
**Terms and conditions apply.
Terms and Conditions
1. Refund will be in the form of a check issued in US Dollars and will be provided
only if all Terms and Conditions are met.
2. The following items must be returned to Remington and postmarked no later
than 60 days after purchase of the Remington
®
branded Men's Shave and
Groom product:
a. The Remington
®
product;
b. The original sales receipt indicating price and date purchased; and
c. The completed 60-day money back guarantee form located at
RemingtonProducts.com/60day.
3. In addition, Remington, in its discretion, must determine that the returned
product was used in accordance with the instruction booklet (included with the
product at the time of purchase).
4. Returns should be mailed prepaid (no collect returns accepted) to:
Remington 60-Day MBG
507 Stokely Drive, Box 1
DeForest, WI 53532
5. Refund does not include postage costs for the return of the product, but will
include applicable taxes paid by customer, if any.
6. No responsibility will be accepted for late, lost, stolen, misdirected or damaged
product.
7. Please allow 4-6 weeks to receive your refund by check.
100-240 VAC 50/60 Hz
Questions or comments:
Call 800-736-4648 in the US, or
800-268-0425 in Canada, or visit RemingtonProducts.com
Dist. by: Spectrum Brands, Inc., Middleton, WI 53562
Dist. by: Spectrum Brands Canada Inc.
131 Saramia Crescent
Vaughan, ON L4K 4P7
® Registered Trademark of Spectrum Brands, Inc.
© 2015 Spectrum Brands, Inc. 6/15
13051-00
Made in China.
Contains a
T22-0003524
listed adaptor
Advertisement
