4. Other Operations
4.2 Selecting Detector Parameter Settings
With the TS-3200A, it is possible to set up to 10 different parameter settings of the detector, etc. as
condition files.
Since comment entry is possible for each condition file, this function is effective when using multiple
detectors by selecting each one.
COND: 01 to COND10
10 parameter settings can be registered to COND01 through COND10.
10 parameter settings are saved automatically.
COMMENT: Alphanumeric characters including symbols displayed in the menu can be entered.
Note: Use the [SPC] key when you want to change an existing character to a space.
Although (DETECTOR SET) is saved basically, only comparator setting (USER SET) is saved at the
same time.
4-5