Replacing The Battery - REIZEN 704066 Instruction Manual

Reset Watch Hands
1. Wait until the second hand ticks to the 12 o'clock position and pull out the crown
immediately so that the second hand stops at 12.
2. Turn the crown to set Hour and Minute hands to 12 o'clock.
3. After all hands are set to 12:00:00, hold S1 (2 o'clock button) for 5 seconds and then,
4. Push in the crown.
5. The watch hands spin to match the internal time and resume normal running when
the time matching is finished. After the watch resumes normal running, the watch
hands will match the internal time-keeping of the watch.
Reset Watch To Atomic Radio Signal
You can reset the watch as follows:
1. While the watch is running, pull out the crown to stop the second hand at the 12
o'clock position.
2. Turn the crown to set Hour and Minute hands to 12 o'clock. Now all hands are set to
12:00:00.
3. Do not push in the crown but press and hold S1 (2 o'clock button) for 15 seconds and
then;
4. Push in the crown. Your watch will not run after the crown is pushed in.
NOTE: Place your watch near a window to get a time setting signal. The watch will start
to update. It will continue updating the signal over the next 24 hours if the first time
setting signal reception is not successful. The hands will move to the correct time after
receiving a valid time signal.
Watch Not Receiving Time Signal
Reasons for not being able to receive the Time Signal include:
-Being outside of the USA, UK, Germany or Japan (60 KHz) radio signal area
-Being in an area with building construction
-Metal objects or structures blocking the radio signal
-Interference by computer monitor or TV
NOTE: Ensure that the watch is left by a window, as this gives the best reception. You
may have to try different windows in the house to see which works best. You can test this
using the reception status test described earlier. Please note that reception is always better
at night.
If your watch is unable to make contact with the radio signal, it will continue to function
in the same way as a standard watch. The time will then be corrected the next time your
watch receives the radio time setting signal.

Replacing the battery

The built-in rechargeable battery is not user-replaceable. In the event it appears necessary
to replace the battery, please contact Reizen for service. See "Manufacturer's Limited
Warranty" section.
7