Low Battery Alert - REIZEN 704066 Instruction Manual

S2
Push S2 (4 o'clock button) one (1) time to check alarm time setting and to determine if
●
the alarm is set to ON or OFF (the watch says the alarm time followed by either "Alarm
is ON" or "Alarm is OFF")
Crown
Use to reset all hands to 12:00:00 position
●
NOTE: When the crown is pulled out, the watch stops immediately.
Battery Power Level Check
1. Press S2 two (2) times to show the battery power level.
NOTE: Battery Power Level is indicated by second hand position:
High = Second hand points to 8 o'clock
Medium = Second hand points to 7 o'clock
Low = Second hand points to 6 o'clock

Low Battery Alert

When Battery Power Level is low, the watch generates a "beep-beep" sound before it
announces the time, calendar, reception status, or alarm.
Please recharge the watch when you hear the "beep-beep" sound.
How To Charge Watch
When Battery Power Level is low, the seconds hand runs 2 steps every 2 seconds. When
this is the case, all button operations and signal reception will not function. If the watch is
not charged in time, the hands stop at 12 o'clock to conserve the remaining battery power.
The watch should be charged as soon as possible.
The charging input socket of the watch is on the back of the watch. Connect the provided
USB charging cable to a computer USB port or USB AC Adapter (not included) and the
other end into the watch.
The watch makes a chirping sound when the plug is correctly inserted and charging
begins.
Correct Watch Positions For Time Signal Radio Reception
Your watch should be positioned as follows and put near a window during signal
reception or you will not be able to get the best reception result.
As shown below, for metal case watches with a metal band, the watch band should not
make contact with the back of the watch case (insert a non-metal object to serve as a
2