Operation-Cd Player - Rockford Fosgate RFX9220M Installation & Operation Manual

Rfx series source units
Table of Contents

Advertisement

Available languages

Available languages

Basic Operation
NOTE: This system will play AUDIO CDs created on a Macintosh
NOTE: This system will play CD-R and CD-RW discs.
To Play a CD
1. Press OPEN button and the Front Panel will slide open.
2. Insert a CD and the Front Panel will slide closed after 5 seconds.
3. CDP PLAY will auto-select and the CD will begin playing track 1 immediately.
4. Use UP or DN {Down} Button (
To Eject a Disc
1. Press the OPEN button, "EJECT" appears on the display and the Front Panel will
slide open and eject the disc.
2. Press the OPEN button while Front Panel is open, or wait 5 seconds and the
Front Panel will auto-close.
NOTE: If OPEN is pressed and held for longer than 1 second, the Front Panel will open and Eject will not be
engaged. If the disc is not romoved after being ejected, the unit will wait 10 seconds before pulling
the disc back in and auto-closing the front panel. It will not start playing the disc if this happens.
Panel Display
While playing a disc the panel will display the track number and the time played, also the disc number if in
CDX mode, unless the default has been change to TITLE DEFAULT and a disc title has been programmed in.
See PANEL DISPLAY DEFAULT in OPERATION-BASIC.
Advanced Operation
The following also works with the optional CDX Multi-Disc Changer if it has been installed.
NOTE: Items shown in () refer to remote control functions.
Track Selection
1. Press the UP Button (
2. Press the DN {Down} Button (
Considerations
CDP MODE:The disc will start over at track 1 again after the last track plays.
CDX MODE: When the last track number on the current disc is reached, the next disc will load in the CD
changer and begin playing track 1.
To Play Tracks at Random
1. Press the 3/RDM button to randomize the tracks on a disk. If you have
a multi-disc changer, press and hold the 3/RDM button for 1 second to
randomize the discs and tracks.
2. To cancel, press the 3/RDM button a second time.
NOTE:The panel will display RDM until the function is cancelled.
or
)to change tracks.
) to select the next track on the disc.
) to select the previous track.
O
– CD P
PERATION
Remote
MODE
LAYER
ENT
BAND
15

Advertisement

Table of Contents
loading

Table of Contents