General Safety Rules - Hoover Dynamic Next WDMT413AI2 Manual

1. GENERAL SAFETY
RULES
This appliances is intended to be
l
used in household and similar
applications such as:
- Staff kitchen areas in shops, offices
and other working environments;
- Farm houses;
- By clients in hotels, motels and
other residential type environments;
- Bed and breakfast type environments.
A different use of this appliance
from household environment or
from typical
functions, as commercial use by
expert or
excluded even
applications. If the appliance is
used in a manner inconsistent with
this it may reduce the life of the
appliance and
manufacturer's
damage to the appliance or other
damage or loss arising through
use that is not consistent with
domestic or household use (even if
located in a domestic or household
environment)
accepted by the manufacturer to
the fullest extent permitted by law.
This appliance can be used by
l
children aged from 8 years and
above and persons with reduced
physical, sensory
capabilities or lack of experience
and knowledge if they have been
given supervision or instruction
concerning use of the appliance in a
safe way and understand the
hazards involved.
housekeeping
trained users,
in the above
may void
warranty.
shall not
or mental
Children shall not play with the
appliance.
maintenance shall not be made by
children without supervision.
Children should be supervised to
l
ensure that they do not play with
the appliance.
Children of less than 3 years
l
should be kept away unless
continuously supervised.
If the supply cord is damaged, it
l
must
manufacturer, its service agent or
similarly qualified persons in order to
avoid a hazard.
is
Only use the hose-sets supplied
l
with the appliance for the water
supply connection (do not reuse
old hose-sets).
the
Water pressure must be between
Any
l
0,05 MPa and 0,8 MPa.
Make sure that a carpet do not
l
obstruct the base of the machine
and ventilation openings.
be
The OFF condition is reached by
l
placing the reference mark on the
programmes control/knob in the
vertical position. Any other different
position of such control sets the
machine in ON condition (only for
models with programmes knob).
The final part of a washer dryer
l
cycle occurs without heat (cool
down cycle) to ensure that the
items are left at a temperature
that ensures that the items will not
be damaged.
4
Cleaning
be replaced
and user
by the