Stereo Operation
Speaker
+
• RCA inputs are connected to both left and right channels
• Signal Input Switch selected to Unbalanced for RCA input
• Left Phase Switch set to 0
• Right Phase Switch set to 0
• Gain for left and right channels operate independently
• Impedance for each channel should be 2 minimum
• XCard can be High-Pass, Low-Pass or Full Range position
Stereo/Mono Operation
+
Speaker
Terminal
• RCA inputs are connected to both left and right channels
• Signal Input Switch selected to Unbalanced for RCA input
• Left Phase Switch set to 0
• Right Phase Switch set to 180 for stereo/mono operation
• All speaker polarity on right channel is inverted to correct for signal phase
• Gain for left and right channels set equally to balance the subwoofer
• Impedance for each channel should be 2 minimum
• Impedance for bridged channel should be 4 minimum
• XCard is in Full Range position
• Passive crossovers are needed for proper stereo/mono operation
RCA
Input
L
R
L
(Mono)
Balanced
Gain
Bass
Phase
L
–
L
R
EQ
0 – 180
Balanced
Pass Thru
Pass Thru
Unbalanced
–
2 Min.
2 Min.
+
RCA
Input
L
R
L
(Mono)
Speaker
Gain
Bass
Phase
+
L
–
L
R
EQ
0 – 180
Balanced
Pass Thru
Pass Thru
Unbalanced
–
2 min.
2 min.
+
+
4 min.
– 17 –
R
Gain
Speaker
Input
–
R
+
EZ Bridged
180 - 0
–
+
R
Balanced
Gain
Speaker
Input
–
R
+
EZ Bridged
180 - 0
+
–
–
Speaker
–
Terminal
I
®
®
N
S
T
A
L
L
A
T
I
O
N