Cisco ASR 9000 Series Configuring page 42

Configuration Examples for Channelized SONET
mode tug3
tug3 1
mode t3
root
controller t3 0/4/0/0/1/1
mode serial
commit
The following exampe shows SDH AU-4 channelization to TUG-3 and clear channel E3:
configure
controller sonet 0/4/0/0
framing sdh
au 1
width 3
mode tug3
tug3 1
mode e3
root
controller e3 0/4/0/0/1/1
mode serial
commit
Channelized SDH AU-4 to TUG-3, TUG-2, and T1/E1 and NxDS0: Examples
Channelization to T1/E1 and NxDS0s is not supported on the 1-Port Channelized OC-48/STM-16 SPA.
Note
The following example shows SDH AU-4 configuration with unframed E1 controllers and serial
interfaces:
configure
controller sonet 0/1/2/0
framing sdh
au 1
width 3
mode tug3
tug3 1
mode c12-e1
!
tug3 2
mode c12-e1
!
tug3 3
mode c12-e1
!
controller E1 0/1/2/0/1/1/1/1
framing unframed
!
controller E1 0/1/2/0/1/1/1/2
framing unframed
!
controller E1 0/1/2/0/1/1/1/3
framing unframed
!
interface Serial0/1/2/0/1/1/1/1:0
encapsulation ppp
multilink
group 1
!
interface Serial0/1/2/0/1/1/1/2:0
encapsulation ppp
Cisco ASR 9000 Aggregation Services Router Interfaces and Hardware Component Configuration Guide
HC-358
Configuring Channelized SONET/SDH on the Cisco ASR 9000 Series Router
OL-26061-03