Quick Start Guide - 4iiii Sportiiiis User Manual

Getting to Know Your Sportiiiis Unit
Speaker Micro-USB Port
gives audio prompts connect to computer
either when triggered to configure, charge,
by TipTap or (option- and sync your Sportiiiis
ally) when above or be- unit
low zone for currently
enabled sensor
Welcome to Sportiiiis!
Thank you for purchasing Sportiiiis. Sportiiiis is a heads-up display – it gives you the feedback you
need while running or cycling to stay in your target range (zone) for heart rate, cadence, power, and
pace/speed, without having to look down at a watch, cyclocomputer, etc. It can pair with, and receive
data from any ANT+-enabled heart rate strap, foot pod, power, or speed/cadence sensor.
When properly mounted to your glasses, the boom of the Sportiiiis unit will be in your peripheral vi-
sion, so that its LEDs can tell you whether you are below, above, or in your zone by their color (green,
yellow, orange, or red) and position.
Through the downloadable Windows, Mac or Smartphone Configuration Utility, you can set up the
Sportiiiis unit and configure the zones for your individual needs.
What's in the Box?
USB Charge/Sync Cable
Power Button Boom
capacitive-touch but- contains seven
ton (merely has to (Light-Emitting Diodes)
be touched, cannot that can be programmed
be depressed), pow- by color and position to
ers Sportiiiis on and indicate where your per-
off and controls other formance is relative to
functions the target zone for your
currently-enabled sensor
Sportiiiis Unit
(2) Mounting Brackets
(10) Tie Wraps
Functions of the Power Button
ACTION SPORTIIIIS POWERED ON
press Power Button
(unit beeps once)
hold Power Button until
unit beeps twice
hold Power Button until
unit beeps three times
hold Power Button until
unit beeps four times
Your Sportiiiis unit contains an accelerometer, which allows it to respond to single and double "taps. "
LEDs
While it is powered on, a single tap will cause your Sportiiiis unit to enunciate the measurement from the
active sensor, and a double tap (two taps in succession) will switch between currently paired sensors.

QUICK START GUIDE

SPORTIIIIS POWERED OFF
start/stop session show remaining battery power
turns Sportiiiis unit off turns Sportiiiis unit on
switch bike/run mode
-------------- clear all paired sensors & pair
TipTap
pair sensors