RocketFish RF-SH430 User Manual page 17

Rocketfish wireless bluetooth headset user guide
Table of Contents

Advertisement

Available languages

Available languages

How to...
Decrease the volume. With the headset on or during a call,
Enter pairing mode.
Accept a call.
Reject a call. (Only
available with mobile
phones supporting
hands-free mode 2)
Voice dial. (Only
available with mobile
phones supporting
voice dialing)
End a call.
Save a favorite
number.
Call a favorite number Press the multi-function button for
Activate automatic call
pick up.
Check the battery
level.
Action
press the Vol– button repeatedly.
With the headset off, press and hold
the multi-function button for five
seconds. See the pairing instructions
of your mobile phone.
During the incoming call, press the
multi-function button once.
During the incoming call, press and
hold the multi-function button for one
second.
With the headset on, press the
multi-function button once.
During a call, press the multi-function
button once.
Press the Vol– and Vol+ buttons for
three seconds.
one second.
With the headset on, press the
multi-function button and the Vol–
button for one second.
With the headset on, press the
multi-function button four times.
Headset response
Every press you hear a beep with a
lower volume and lower tone
Headset indicator flashes green twice
every second and you will hear a series
of high tones.
Headset picks up the call.
Headset rejects the call.
Headset makes a series of short beeps
while mobile initiates the voice dialing
command.
Headset hangs up the current call.
Last incoming call number is stored as
favorite.
Calls the favorite number.
Selects the automatic call pick up
mode. You can deactivate automatic
call pick up in the same way.
The number of tones (1, 2, 3, or 4)
approximately indicates the remaining
talk time in hours (>1, 2, 3, or 4).
RF-SH430
17

Advertisement

Table of Contents
loading

Table of Contents