Mitsubishi Electric PEFY-P20VMR-E-L Technical & Service Manual page 12

[ V WIRING DIAGRAM ]
[5] WIRING DIAGRAM
(A)
The fan motor connector is ready for connection to a 220V/230V power supply at factory shipment. Use blue connector adapter
(supplied) to connect to a 240V power supply.
Coler/Power supply voltage
White/220V. 230V
Blue/240V
NOTE: 1. Wiring to TB2, TB5, and TB15 indicated by the dash-double-dotted lines is on-site work.
2. terminal block,
SYMBOL EXPLANATION
SYMBOL
MF Fan motor
C Capacity (for MF) 1.5µF
I.B Indoor control board
A.B Address board
TB2 Power supply terminal block
TB5 Transmission terminal block
TB15 Transmission terminal block
F1 Fuse 250V AC 6.3A F
T Transformer
LEV Electronic linear expan. valve
S.B Surge absorber board
X04~X06 Aux. relay
connector.
NAME SYMBOL
TH21 Thermistor (inlet temp.)
TH22 Thermistor (liquid pipe temp.)
TH23 Thermistor (gas pipe temp.)
SW11 (A.B) Switch (For setting the 1's digit in the address)
SW12 (A.B) Switch (For setting the 10's digit in the address)
SW14 (A.B) Switch (connection No. setting)
SW1 (A.B) Switch (function setting)
SW2 (A.B) Switch (capacity code setting)
SW3 (A.B) Switch (function setting)
SW4 (A.B) Switch (model setting)
SW5 (A.B) Switch (voltage setting)
SW7 (A.B) Switch (function setting)
- 8 -
NAME