Advertisement
[repeat new PIN1] [Enter]
Checking the new Master code:
[ON][new PIN1][Enter]
4.2
Changing the User Code [PIN2] with the
Master Code [PIN1]
Before changing the User Code [PIN2] default
factory setting of Master code [PIN1] have to be
changed (see par.4.1).
[ON] [Enter] [2] [Enter] [PIN1] [Enter]
[new PIN2] [Enter]
[repeat new PIN2] [Enter]
Checking the new User code:
[ON][new PIN2][Enter]
4.3
Changing the User Code [PIN2] without the
Master Code
[ON] [Enter] [3] [Enter] [PIN2] [Enter]
[new PIN2] [Enter]
[repeat new PIN2] [Enter]
Checking the new User Code:
[ON][new PIN2][Enter]
4.4
Deleting the User Code
[ON] [Enter] [0] [Enter] [PIN1] [Enter]
5
Servicing
5.1
Changing the Battery
The battery is located on the inner side of the
door. Depending on the safe model, battery
could
be
either
inside
compartment (Fig.5.1a) or in a special pull-out
battery box (Fig.5.1b).
Safe Digital Lock
Take out the cover of the battery compartment
of the lock (see Fig. 5.1a. or pull out the box
(see Fig. 5.1b).
Fig. 5.1
Install a new battery (9V, type 6LF22).
Take the cover or the box back to their location.
5.2
Take a new battery (9V, type 6LF22).
Press the new battery to emergency power pins
and fix it in this position (see Image 5.2).
Do not make the battery's contacts to the metal
parts of the lock.
Fig.5.2
Enter the valid code on the keypad (1).
the
lock
battery
Disconnect the emergency battery, open the
door and change the discharged battery, see
par. 5.1.
PS300/E31, PS300/ES01, PS300/E02
a.
b.
Opening the lock when the Battery is
Discharged
www.promet-safe.com
USER MANUAL
Ver.4/1 as of 21.02.2017
Advertisement
