Configuring A Code Reader For Jpos - Code CORTEXJPOS CR6000 User Manual
Cr9 series, cr1 series; cr8 series, north america, emea, apac
Hide thumbs
Also See for CORTEXJPOS CR6000:
- Configuration manual (21 pages) ,
- User manual (11 pages) ,
- Configuration manual (106 pages)
Table of Contents
Advertisement
5.0 - Linux Installation (continued)
8.
On the final screen, click "Finish".
6.0 - Configuring a Code Reader for JPOS
Code Readers can be used in either USB or RS232 mode to communicate with JPOS programs. The default RS232 parameters are sufficient, but
USB must be changed to USB Native Mode for JPOS use. Scan the appropriate barcode below depending on your model. The CR8200, CR950,
and CR1500 will use M20177_01. All others will use M10004_02.
USB Native Mode
USB Native Mode
for CR8x Readers
for CR8200 Readers
7
D008733_02 CortexJPOS User Manual
- Quick Links:
- Configuring a Code Reader for Jpos
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CORTEXJPOS CR6000 and is the answer not in the manual?
Questions and answers