Wolf Pro Series Ventilation - Wolf SO30U Design Manual

W P S
O L F R O
In a horizontal discharge application,
additional framework may be needed
to accommodate the remote blower.
Consult your local HVAC professional
for specific requirements in this appli-
cation.
IMPORTANT NOTE: All Wolf ventila-
tion hoods must be vented to the
outside. Use only metal ductwork.
Local building codes may require the
use of make-up air. Consult your local
HVAC professional for specific require-
ments in your area.
Wolf Pro Series 27" (686) deep wall
hoods have a vertical discharge
location as shown in the illustration.
Dimensions in parentheses are in millimeters unless otherwise specified.
V
E R I E S E N T I L A T I O N
ROOF CAP OR REMOTE BLOWER
Ducting considerations for 27" (686) deep Pro Series wall hood.
10" ROUND DUCT
SOFIT OR CABINET
OR DUCT COVER
18"
(457)
WALL HOOD
HEIGHT OF HOOD
27"
DEPTH OF HOOD
30" 36"
TO
(762 - 914)
COOKING SURFACE
TO BOTTOM OF
VENTILATION HOOD
37"
(940)
TO COOKING
SURFACE
VERTICAL DISCHARGE ONLY FOR 27" (686) DEEP WALL HOODS.
*DIMENSIONS FOR TRANSITION INCLUDES FLANGES.
DUCTWORK INSTALLATION
THROUGH ROOF
TRANSITION*
22-1/4"W x 9"D TO 10" ROUND
VERTICAL DISCHARGE
(686)
10"H
73