Table of Contents
Advertisement
2.1 Turn on
Before turning on the instrument, check if the external
power has been connected or the battery has been mounted,
ensuring a power supply to the instrument, then start the
instrument, the screen will show starting Logo.
After the completion of boot interface, instrument into the
self-test program, ensure the normal working of the instrument.
2.2 Switchable Calibers
This instrument has 3 switchable calibers to measure different
objects. The calibers include 4mm (standard)/8mm (standard) and
40mm (optional). The steps to exchange the calibers as below (for
example 8mm diameter replacing 4mm diameter)：
1. Remove the 8 mm diameter, as shown in figure 6 left,
counterclockwise to remove measuring diameter; Install 4 mm
diameter, as shown in figure 6 on the right, clockwise on measuring
diameter;
Colorimeter Manual
II. Operation
figure 6 switchable calibers schematic diagram
Advertisement
Table of Contents
