Table of Contents
Advertisement
1.2.1 Battery
1. First check and confirm if the
Switch is on Out (O), then
following the arrow direction as
shown on Figure 2, take out the
battery cover by pressing down.
2. Mount the battery into the
compartment
Figure 3,
pay attention to the front and
back of the battery.
3. Follow the directions on
Figure 4, press up to mount the
battery into the compartment.
6
Colorimeter Manual
as
shown
Figure 2. Remove the battery cover
in
Figure 3. Mounting the battery
Figure4. Mounting the battery cover
Advertisement
Table of Contents
