WBOX Technologies 0E-4CHNVR2TB User Manual page 46

8 Setting
Parameter
Daylight
Savings Time
Device Time
NTP
NTP port
Step 2 Select a time zone from the Time Zone drop-down list box.
Step 3 Click the button on to enable Daylight savings time and specify the DST start time and
end time.
Step 4 Modify the Device time.
Step 5 Selecta Date Format from the drop-down list box.
Step 6 Configure the NTP.
Step 7 Click the button on to enable NTP, enter the IP address or domain name of the NTP
server and the port number.
Step 8 Click
Step 9 Click OK.
The system saves the settings.
-----End
38
Description
When the DST start time arrives,
the device time automatically
goes forward one hour. When the
DST end time arrives, the device
time automatically goes backward
one hour.
NOTE
DST is the practice of advancing
clocks so that evenings have more
daylight and mornings have less.
Currently, about 110 countries in
the world use DST. Different
countries have different DST
provisions. Since March 27, 2011,
Russia has started to use permanent
DST.
Device display time.
IP address or domain name of the
NTP server.
Port number of the NTP server.
, the message "Setting succeed" is displayed.
Network Video Recorder(NVR)
User Manual
Setting
[Setting method]
Click the button on to
enable Daylight savings
time.
[Setting method]
Enter a value manually
[Setting method]
Click the button on to
enable NTP and enter a
value manually.
[Setting method]
Enter a value manually.
[Default value]
123
Issue V1.0 (2018-05-11)