WBOX Technologies 0E-4CHNVR2TB User Manual page 25

Network Video Recorder(NVR)
User Manual

The default IP address of the NVR is: 192.0.0.64.

You can enable automatic IP address acquisition and set the IP address, DNS
address of the NVR, and display the network connection status and speed.
4. Hard disk management

Formatting will clear all video data on the hard disk. Use this function only when
necessary.

Be sure to uninstall the hard disk before removing it from the NVR during runtime;
otherwise, the hard disk may be damaged or data may be lost.
 The NVR must be connected to a stable power supply during runtime; otherwise,
the hard disk may be damaged or data may be lost.
You can manage the hard disk of the NVR as follows:

Format the hard disk. Click Format. In the displayed dialog box, click Yes.

Check the used space and total space of the hard disk.
5. Authentication accounts of managed cameras
Only successfully authenticated cameras can be used normally. Before adding a camera,
add the authentication account and password of the camera to the list.
To log in to an IP camera, you need to enter the correct authentication account. Only
successfully authenticated IP cameras can be managed. Double-click the user name and
password text field to modify the user name and password
6. Camera search and deletion
When you need to search camera for management, click Search Camera, the Camera
Search interface is displayed, then click Scan, it will scan for the camera automatically,
as shown in Figure 4-2.
Issue V1.0 (2018-05-11)
4 Quick Setup
17