Summary of Contents for WBOX Technologies 0E-4CHNVR1TB
Page 1
Step-by-step Guide/How-to How can I enable the motion detection recording on DVR V4.2 or NVR V4.2? Product Models: Hybrid DVR 0E-HD4C1TB 0E-4CHNVR1TB / 0E-4CHNVR2TB 0E-HD8C2TB 0E-8CHNVR2TB 0E-HD16C2TB 0E-16CHNVR2T / 0E-16CHNVR4T Firmware Version: V4.2.XXXX.0000.157.X.XX.X.X Preparation: If you would like the device to record on motion detection only, please ensure to...
Page 2
Step-by-step Guide/How-to 3. If you would like to disable the scheduled recording for the other channels, click Copy and select the specific channel you would like to copy the setting. Click then Apply to save the changes. Procedure: 1. Click the right mouse button and select General under Alarm.
Page 3
Step-by-step Guide/How-to 2. Turn on the Enable Alarm option and select a Duration Time from the drop-down list. Click Apply to save the settings. 3. Go to Motion Detection. Under Channel, select a specific channel you would like to set the motion detection recording.
Page 4
Step-by-step Guide/How-to Other Event Actions: Alarm out – if this is enabled and an alarm device is connected to the recorder, the recorder will trigger the alarm device whenever a motion is detected. Push message – if this is enabled, the device will push an alarm notification on the WBOX VMS1 app whenever a motion is detected.
Page 5
Step-by-step Guide/How-to 5. Under the Schedule setting, select the specific day and time that you would like to detect the motion. Use the left mouse button to select a specific box. You may also hold down and drag the left mouse button to select a wider schedule.