Advertisement
CONNECTING YOUR KA-4006
TUNER CONNECTION
Use the TUNER terminals for connection t o an
FM
stereo or
AM-FM stereo tuner.
Connect the left channel of the tuner t o the "L" TUNER input
jack, and the right channel of the tuner t o the "R" TUNER input jack.
RECORD PLAYER CONNECTIONS
Connect the left channel of the record player t o the "L" PHONO
1 input jack, and the right channel t o the "R" PHONO 1 input jack.
I f an additional record player i s used in order t o operate t w o
record players, connect the left channel t o the
"L"
PHONO 2 input
jack, and the right channel t o the "R" PHONO
2
input jack.
If the record player has a grounding terminal, connect it t o this
amplifier's GND terminal t o prevent hum.
D I N CONNECTOR (RECIPLAY CONNECTOR)
If your tape recorder is equipped with a D I N type 5-pin connector,
connect it t o the RECIPLAY connector w i t h a DIN connecting cord.
A D I N connector enables recording and playback w i t h this single cord.
When a D I N cord is used for connecting t o the tape recorder, the
PLAY and REC jacks should n o t be used. For highest fidelity recording
and playback sound however, it is recommended that the tape recorder
be connected t o the P L A Y and REC jacks instead o f the DIN con-
nector.
CONNECTION FOR A D D I T I O N A L TAPE RECORDER
If
an additional tape recorder is used and t w o tape recorders are
operated simultaneously, the same connections must be provided f o r
B TAPE jacks.
CONNECTIONS FOR TAPE RECORDER
A U X ( A U X I L I A R Y INPUTS)
RECORDING
A tape recorder can be connected as follows for recording.
Left channel input of the tape recorder t o A TAPE
"L"
REC jack.
Right channel input of the tape recorderto A T A P E "R" RECjack.
PLAYBACK
A tape recorder can be connected as follows for playback.
Left channel output of the tape recorder t o A TAPE "L" PLAY
jack.
Right channel output of the tape recorder t o A TAPE "R" P L A Y
jack.
When a tuner, tape recorder or other u n i t is connected here, it
must have an o u t ~ u t o f at least 150 mV.
AC OUTLETS
The A C outlets o n the rear panel o f the amplifier may be used
t o supply power t o other components such as a record player, tape
recorder, etc.
1.
SWITCHED outlets
These outlets are controlled by the POWER switch on the front
panel. (The total capacity is 100 watts maximum.)
2.
UNSWITCHED outlet
This outlet
is
available at all times.
(The capacity is 200 watts
maximum.)
Advertisement
