Download Print this page

Specifications - Honeywell GKP-S8M Installation Instructions And Instructions For Use

Wireless keypad with integrated tag reader and siren
Hide thumbs Also See for GKP-S8M:

Advertisement

SPECIFICATIONS

Unit Dimensions: 112.5 x 175.5 x 25 mm (with bracket)
Weight: 259g without batteries; 290g with batteries
Battery: 2x CR123A 3-Volt Lithium
Battery Life: 4 years
Tamper: Pry off and case opening tamper
Radio Frequency: 868 MHz. Radio Range: 2000m in open field
Radio Protocol: ALPHA
Operating Temperature: -10°C to +55°C
Storage Temperature: -20°C to +70°C
Operation and Storage Humidity: 5% to 95% (without condensation)
Operating Voltage: 3V
Supply voltage fault threshold: 2.65V
Siren Output: 92 dBA at 3m (if keypad siren level is set to "High Power")
Consumption:
o
Transmission: 23mA (typ)
o
Alarm: 300mA (max)
o
Standby: 39μA (typ)
BATTERY REMOVAL AND HANDLING SAFETY WARNING
Risk of fire, explosion and burns, do not recharge, disassemble, heat above
100°C, or incinerate the batteries. While the batteries can normally be safely
removed by hand, care should be used to ensure that the battery terminals are
not shorted, nor the battery damaged, during the removal process. Dispose of
depleted batteries by complying with applicable national and local regulations. In
the event of the battery being damaged, use personal protective equipment to
remove it immediately, and dispose of it in a safe manner (refer to the battery
manufacturer's specifications for such situations).

Advertisement

loading