Advertisement
In programming mode, it is possible to:
Set arming with identification:
1. Press "Total arming"
2. Press
(④) to activate arming with identification (code and TAG)
Set quick arming:
1. Press "Total arming"
2. Press
(⑤) to activate quick arming
Associate a TAG to a user:
1. Press "0 to 9" button to select user's number
2. Present the TAG
Note: The keypad will automatically get out of programming mode if the TAG is already
registered. If the user already has a TAG, it is replaced by the new one.
Change a user's code:
1. Press "0 to 9" button to select user's number
2. Enter new user's code
3. Re-enter new user's code
Disable a user's code (disable the code for a user and keep the
TAG only):
1. Press "0 to 9" button to select user's number
2. Enter 0000 (or 000000 if 6 digits)
3. Press
(⑤)
Disable a user:
1. Press "0 to 9" button to select user's number
2. Press
(⑤) to disable the user (code and TAG)
Enable a user:
1. Press "0 to 9" button to select user's number
2. Press
(④) to enable the user (code and TAG)
Note: it is possible to set a code and/or a tag to each user. The keypad can have up to 10
users. The keypad can also be programmed to manage 4-digit or 6-digit codes (using
programming tool).
button to select function
button to select function
Advertisement
