Working Time Buttons; Turning On/Off The Driver Terminal - TomTom 4PN50 User Manual

Alternatively, you can tap the button showing the currently selected working state in the
WEBFLEET panel on the left while in map or guidance view.
2. Tap the appropriate button to change your
You can select between Start, Pause and End. When you tap Start, the time you started
working is indicated. To report the start of a break tap Pause. To resume work after a break,
tap Start again. To report the end of your work tap End.
Note: Either Working Times or Logbook is available. These are activated by the office using
WEBFLEET.

Working time buttons

You can report your working hours by using the following buttons.

Turning on/off the Driver Terminal

When you turn on your Driver Terminal, you may be asked to report that you are starting work or
finishing a break. This happens if the last status you reported before switching off was End or
Pause.
When you turn off your Driver Terminal and you have not reported End or Pause, your device
displays a menu with the options End, Pause and Start. You can then report your status to
WEBFLEET before turning off.
Note: The feature that asks you to Report work time transactions is activated by the office
using WEBFLEET.
Start to work
Take a break
Finish work
work status.
114