Advertisement
Table of Contents
Installation Guide
External enclosure for SATA
slim line CD/DVD-ROM drives
up to 9.5 mm
Installationsanleitung
Externes Gehäuse für SATA
slim line CD/DVD-ROM Lauf-
werke bis zu 9,5 mm
Package Content
1x IB-AC640a, 1x Y-cable, 1x accessories,
1x quick installation guide
Key Features
• Premium aluminium case
• Supports SATA slim line CD/DVD ROM drives
up to 9.5 mm
• USB bus powered – no power supply is necessary
• Supports: PC & Mac
• Plug & Play
• USB 2.0 interface
Verpackungsinhalt
1x IB-AC640a, 1x Y-Kabel, 1x Zubehör,
1x Schnellinstallationsanleitung
Hauptmerkmale
• Hochwertiges Aluminium Gehäuse
• Unterstützt: SATA Slimline CD/DVD-ROM Laufwerke
bis zu 9,5 mm
• Unterstützt PC & Mac
• Plug & Play
• USB 2.0 Verbindung
IB-AC640a
Installation
Eject the DVD drive's tray by poking
this hole with a pin.
Take the bezel off of the drive.
Make sure the bezel is firmly
attached on the DVD drive.
Unlock the bezel with a screwdriver.
Install the new bezel on the DVD
drive.
Insert the DVD drive into the new
enclosure.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Icy Box IB-AC640a
Summary of Contents for Icy Box IB-AC640a
-
Page 1: Installation Guide
Externes Gehäuse für SATA slim line CD/DVD-ROM Lauf- werke bis zu 9,5 mm Package Content 1x IB-AC640a, 1x Y-cable, 1x accessories, 1x quick installation guide Take the bezel off of the drive. Install the new bezel on the DVD Key Features drive. - Page 2 Installation Push the DVD Drive into the Fasten the screws on the back of the enclosure. enclosure as shown in the picture. Put the sticker on the bakc of the Stick the rubber pads on the bottom enclosure as shown in the picture. of the enclosure if neccessary.
Need help?
Do you have a question about the IB-AC640a and is the answer not in the manual?
Questions and answers