Faqs - Semtech TSDMTX-19V3-EVM User Manual

FAQs

Q: What output voltage is provided by the TSDMTX-19V3-EVM system?
A: It depends on which receiver is being used. For the TSDMRX-19V/20W-EVM, the output would be 19 volts, at
up to 20 watts total power. If the TSDMRX-5W-EVM was used, the output would be 5 volts, at up to 5 watts.
Q: Where can I find more information on the Qi standards?
A: There are a number of websites that address this subject. A good starting point for Qi would be:
http://www.wirelesspowerconsortium.com/technology/how-it-works.html.
Q: Does the EVM part number represent something in particular?
A: Yes. The part number is broken into a prefix, main body, and suffix, separated by dashes. The prefix is
comprised of three two letter groupings that each help define the product represented. As such, the part number
can be read as follows:
Prefix characters:
1+2 = Company :
3+4 = Environment :
5+6 = Type :
Mid-section = Device Voltage and/or Wattage
Suffix = Equipment type:
EVM = Evaluation Module
MOD = Production Module
Therefore, the TSDMTX-19V3-EVM is a Dual Mode, 19 volt Transmitter Evaluation Module provided by Semtech.
Q: What if my questions weren't answered here?
A: Please visit the Semtech website as described on the next page. An updated FAQ for the TSDMTX-19V3-EVM is
maintained there and may contain the answers you're looking for. Your local Semtech FAE can also assist in
answering your questions.
User Guide Rev 2.0
May-18
TSDMTX-19V3-EVM
TS = Triune/Semtech
DM = Dual Mode
TX = Transmit
www.semtech.com
WI = Wearable Infrastructure
RX = Receive
25 of 27
Semtech