Firmware Management - Semtech TSDMTX-19V3-EVM User Manual

Firmware Management

The EVM is shipped with the latest released version of the firmware at the time it was manufactured. However, as
the standard evolves, or enhancements are made to the board performance, the firmware updates will be
available at https://www.semtech.com/power-management/wireless-charging-ics/wiireless-charging-evm-
firmware/index.html.
Equipments for FW update:
GUI for TS80003 allows you install the latest firmware to your board, and also to interrogate the board as to which
version of the firmware is currently installed. Here is the link in the Semtech website to download TS8000X GUI
file, Docs& Resources item:
https://www.semtech.com/products/wireless-charging/linkcharge-ics/TS80003
The following sequence is for FW program:
1. Run WirelessPowerGUI_setup.exe file to any desired location on your computer, then you can find the
Semtech Wilreless Power GUI.
2. Make sure the 19V input is not connected.
User Guide Rev 2.0
May-18
TSDMTX-19V3-EVM
Device
TSDMTX-19V3-EVM
Semtech USB TO UART adapter
Semtech Wireless Power GUI software
www.semtech.com
Qty.
1
1
1
10 of27
Semtech