8.
Select VIEW TRIM PL MCH, and make a note of this value.
9.
Perform the following calculation and make a note of the result:
New Trim Value = Old Trim Value
10. At the Channel box, press F6 to program the TRIM for the mid-channel.
http://cxema.ru
Figure 6.10: Power level view 2
+ (Required Power - Measured Power) x Change per dB
(step 5)
(table)
Figure 6.11: Power level selection 1
(step 2)
(table)
39
EB-GD35 EB-GD35C