Introduction; Contents - Niles MSU250 Installation Manual

INTRODUCTION

The MSU-250 an infrared (IR) extender system enables you to control your IR remote controlled
A/V equipment from a remote location. This enables you to place your A/V components out of sight
(behind cabinet doors, in the rear of a room, or in a different room) and still conveniently operate
your equipment.
Installed at the equipment location, the MSU250 receives the IR commands transmitted from your
existing hand-held remotes in that room. The commands are carried via a small CAT-5 cable to your
A/V equipment in another room, and instantly "repeated".
The MSU250 is compatible with all current Niles infrared systems. It may be used along with the
Niles TS110, MS110, MS210, WS110, and CS110 IR sensors or the IntelliPad®.
The model MSU250 is an IR Main System Unit. It is one of three elements that make up an infrared
extender system:
• IR Main System Unit—Models MSU140, MSU250, MSU480 and MSU440Z
• IR Sensors/Keypads—Models WS110, TS110, MS110, MS210, CS110, MVC100IR
and the IntelliPad
• IR Flashers—Models MF1, MF2, MF1VF, MF2VF and the IRB1
AN IR SENSOR EXPANSION UNIT, MODEL IRH610, IS AVAILABLE FOR IR REPEATER SYSTEMS USED IN
MORE THAN SIX ROOMS.

CONTENTS

• MSU250 (1)
• Screwless Connectors (2)
NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-4373
• In-line Power Supply
• Self-Adhesive Rubber Feet
1
4
(CONTINUED ON NEXT PAGE)
1