NEC AccuSync LCD72VM User Manual page 94

2.6 Check Power Manage Function
Monitor should enter to power saving mode if the following condition occurs.
Mode Horizontal
On ON
Stand-by OFF
Suspend ON
Off OFF
3. External Inspection on the LCD Module
3.1 For QDI Panel (QDI 17EL0707 Rev.02)
External Inspection
Inspection item
Black spot, White spot,
Foreign circular
Material Dent &bubble
Scratches, lint
L: length; W: width (mm)
Average Diameter: D
The external visual inspection: The inspection shall be conducted by using a single 20W fluorescent lamp for
illumination and the distance between the MODULE and the eyes of the inspector shall be 35 cm or more.
* The area for external inspection is active area plus 1.0mm width. (Upper, Lower, Left and Right)
Vertical Power Supply
ON 240Vac
ON 240Vac
OFF 240Vac
OFF 240Vac
Criteria
D > 0.5mm
0.5mm ≥ D ≥ 0.15mm
D < 0.15mm
Minimum distance between defects: 10mm
L > 4.0mm; W > 0.1mm
4mm ≥ L ≥ 2.0mm, 0.1mm ≥ W ≥ 0.01mm
L < 2.0mm, W< 0.01mm
D= a + b
2
a
b
Input Timing
VESA 1024X768 (75Hz)
VESA 1024X768 (75Hz)
VESA 1024X768 (75Hz)
VESA 1024X768 (75Hz)
Length: L
L = Longest
L
5-6
Power Consumption
34W
2W
2W
2W
Reject count (N)
N = 0
N ≤ 3
Don't care
N ≤ 0
N ≤ 3
Don't care
W