NEC AccuSync LCD72VM User Manual page 86

ADDR (Factory mode second page)
ADDR
WR (Factory mode second page)
WR
HOURS RUNNING (Factory mode second page)
HOURS RUNNING
Note: "PREV": Return to Factory mode first page.
"EXIT": Exit the Factory mode.
Select Operate Factory preset function
- Value decrease
+ Value Increase
Auto/Reset No Operate
To specify the access address of the register index of
ZAN3. (for DEBUG )
Select Operate Factory preset function
- Value decrease
+ Value Increase
Auto/Reset No Operate
To modify the content of the specify address of ZAN3.
(for DEBUG)
1. Indicate the "monitor power ON time" and "power
save time" counted from factory shipment.
2. Hour Running function has four kinds of timer.
a. Monitor power on time (Reset-able)
b. Power save time (Reset-able)
c. Monitor power on time (Un reset-able)
d. Power save time (Un reset-able)
Note1: Power save time = Stand by mode + Suspend
mode + off mode
4-34