Assembly Instructions - Kurzweil Andante CUP 310 User Manual

Assembly Instructions

In addition to the main piano cabinet, your instrument comes with a stand requiring assembly, using the parts shown
below. Two people may be needed to complete the assembly, as the stand must first rest on the floor and then the
instrument must be securely attached on top of it.
⑧
⑦
⑨
⑥
⑨
Introduction
Step 1:
Place the stand parts on a carpeted floor or blanket.
Use the four long bolts to attach the pedal unit to the
side panels.
Use the four shorter screws to attach the back panel
to brackets, as shown below.
Step 2:
Move the stand into an upright position and then place
the instrument upon it. To avoid possible damage, don't
let the weight of the body rest on the stand until it is
properly aligned and secured with the six screws as
shown. Rotate the pedal adjuster until it comes in firm
contact with the floor surface. If the adjuster is not in firm
contact with the floor, the pedal will wobble and cause
malfunctions.
page 2