Power Connection - Kurzweil Andante CUP 310 User Manual

Introduction

Power Connection

A DC power adapter supplies the CUP310's power. Connect the power adapter to the DC receptacle on the rear panel
of the CUP310. Then connect the power cord to an AC outlet.
CAUTION: Use only the DC power adapter supplied with the CUP310 / 320.
Connecting the wrong DC power adapter could damage the instrument.
If the power adapter is damaged or lost, contact your Kurzweil dealer to order a replacement.
The AC plug shape will vary depending on location of use. After the CUP310 is set up, turn the power on.
While the unit is performing its power-up routine some of the front panel buttons will flash. After a couple of seconds,
the LCD screen will display the first Piano Program. The CUP310 is now ready to play. Use the Quick Start instructions on the
following pages for the basic steps to change Programs or play one of the Demo Songs.
page 3
Step 3:
Insert the pedal cable connector into the pedal jack
located on the bottom of the keyboard.
Be sure that the connector is inserted in the correct
orientation. Make sure that the cable clamp fastens to
the pedal cable.
The AC plug shape will vary
depending on location of use
.