Usb Midi Connection - Kurzweil Andante CUP 310 User Manual

USB MIDI Connection

In addition to the conventional MIDI In and Out ports, the CUP310 also has a USB port on the panel on the back of
the piano. You can connect the CUP310 directly to a computer with a USB cable. This connection transmits and
receives MIDI data between the CUP310 and the computer.
The CUP310 supports the "Plug and Play" feature used in the Windows XP or higher and Macintosh operating
systems. No drivers are required to use this connection; but you may need to enable MIDI on your computer's sound
and audio control panel.
To use the CUP310 as a MIDI controller with a computer, use any Type-A to Type-B USB cable.
If you have a sequencer program installed on your computer, you can use this USB connection to record and play
MIDI sequences.
The MAIN Boot Loader is entered by holding the MET/RHY/TAP button during power-on.
The ALT Boot Loader is entered if present, by holding the PLAY/PAUSE button during power-on.
If it is not present, the Main Boot Loader will be entered.
The Boot Loader will display a list of items. Use the UP and DOWN Navigation buttons to scroll between different items
in the Boot Loader.
Use the RIGHT navigation button to select the currently highlighted item or to begin the action indicated by the
highlighted item. For some items, this can go to a new menu.
Use the LEFT navigation button or EXIT button as a cancel/no option or to exit the current page.
System Mode (Boot Loader)
MIDI
page 20