Stand; Removing The Stand - Dell OptiPlex 7460 Service Manual

3 Follow the procedure in

Stand

Removing the stand

The following procedure applies only to systems that are shipped with a Basic All-in-One stand:
1 Follow the procedure in
2 To avoid damaging the display, place the system on a flat, soft, and clean surface .
3 To remove the stand:
a Press and slide the release tab forward on the cover [1].
b Hold the tab in the release position and lift the stand upward [2].
c Slide downward to lift the stand off the back cover [3].
After working inside your computer
Before working inside your computer.
Removing and Installing components 21