DB Drive PRO2.6K User Manual

DB Drive PRO2.6K User Manual

Proaudio series

Advertisement

DB DRIVE warrants any products purchased in the U.S.A.
from an authorized DB DRIVE dealer. All products are warranted to be
free from defects in material and workmanship under normal use and
service for a period of (1) year when the unit installed by an authorized
DB DRIVE dealer. Non-authorized dealer installed products carry a (1)
year parts and labor limited warranty. This warranty applies to the origi-
nal purchase only.
DB DRIVE will either repair or replace (as its option) any unit
that has been found to be defective and under warranty provided the
defect occurs within:
One (1) year if purchased through an authorized DB DRIVE dealer.
This limited warranty does not extend to units that have been
subjected to misuse, abuse, neglect, or accident. Products that in DB
DRIVE's judgment shows evidence of having been altered, modified,
or serviced without DB DRIVE's authorization, will be ineligible under
this warranty.
To obtain warranty service please contact your retailer or see
our website www.dbdrive.net for more details.
All warranty claims must be handled directly through the
authorized DB Research dealer they were originally purchased from.
TM
PRO2.6K, PRO3.6K
Due to continuous improvement of the product the Specifications are subject to change without notice.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PRO2.6K and is the answer not in the manual?

Questions and answers

Summary of Contents for DB Drive PRO2.6K

  • Page 1 DB DRIVE warrants any products purchased in the U.S.A. from an authorized DB DRIVE dealer. All products are warranted to be free from defects in material and workmanship under normal use and service for a period of (1) year when the unit installed by an authorized DB DRIVE dealer.
  • Page 3 Low Impedance Stability PRO2.6K - 2 Ohm Stereo, 4 Ohm Bridged PRO3.6K - 2 Ohm Stereo, 4 Ohm Bridged These amplifiers feature a high pass and low pass crossover for both the front and rear channels. Both crossovers can be adjusted to the same for same setting function so that the output is the same on all channels.
  • Page 4 In-Line Power Fuse Mounted within 12” Turn on Remote From Battery Recommended. Battery +12V Head Unit...
  • Page 5: Speaker Connections

    4 Channel Amplifier using connection to additional 2 Pair of RCA Inputs. amplifiers in the system. PRO2.6K and PRO3.6K (Bridged) 94.7 The DB Drive amplifiers are capable of being bridged in a mono configuration. This Head Unit 4 Ohm Speaker PRO2.6K and PRO3.6K...
  • Page 6: Adjustments And Settings

    For example if you wish to drive a pair of subwoofers, you can The gain sensitivity control for the DB Drive amplifier is located on the side panel. This select the “Low Pass” setting on the amplifier to filter out high frequencies. This will send gain control has been included to allow adjustment to properly match the output of the only low frequencies to your subwoofers (see example settings below).
  • Page 7 Input Voltage @ 14.4 Volts PRO2.6K @ 4 Ohm Stereo 4 x 90W @ 2 Ohm Stereo 4 x 180W @ 4 Ohm Bridged 2 x 360W THD at Rated Power: 0.05% Bandwidth: 20Hz- 28KHz Signal to Noise Ratio: >95 dB...

This manual is also suitable for:

Pro3.6k

Table of Contents