Fujitsu fi-6130 Cleaning Instructions page 2

PFU Imaging Solutions Europe Ltd
Brake Rollers
Eject Rollers
Turn the Scanner
Eject Rollers x 2
Clean lightly taking care not to roughen the surface.
Send to" Button
"
Feed Rollers
ON while cleaning the following locations
Using F1 Impregnated Cleaning Wipes
Feed Rollers x 2
Open the ADF only if the Function Number Display is showing "1"through "9".
Simultaneously hold down the "Send to" and "Scan" buttons
on the operator panel. The rollers will start to rotate slowly
Hold a soft dry, moistened cleaning paper against the
surface of the rotating rollers, lightly cleaning the surface.
As a guideline, 7 presses of the "Send to" and "Scan"
buttons make the rollers rotate one full turn.
Scan" Button
"
F o r f u r t h e r i n f o r m a t i o n p l e a s e r e f e r t o t h e
fi-6130 and fi-6140 Scanner Operators Guide
w h i c h c a n b e f o u n d o n o u r W e b s i t e :
h t t p : / / w w w . f u j i t s u . c o m / e m e a / p r o d u c t s /
Cleaning Instructions for fi-6130 and fi-6140 Scanner
Glass
Plastic
Rollers
J a n u a r y 2 0 1 0
Pick Roller