Advertisement
STAGE 4 (Adding the new top)
Peel back the tape and place the custom top into position.
Using Tape allows you to have a few goes at getting the perfect position for the top before pressing it
firmly home and letting the tape adhesive to bond and cure.
Any final "fine-tuning" of levels, if still required, can be achieved by adjusting the male ball's position
so that in the closed (catch-engaged) position, your new top and adjacent surface are perfect. By
twisting the threaded ball part, and holding the top nut, the position of the ball can be raised or
lowered by the tiniest of amounts.
You can now fix the front back on - and ENJOY YOUR CUSTOMISED POP-UP SOLUTION!
Please Note:
All electrical connections for the Power Box unit must be carried out by a fully Qualified Electrician.
Advertisement
