Advertisement
STAGE 3 (Re-weighting the counterbalance)
The new top will be heavier than the standard stainless steel one it is replacing, so the internal
counterweight box will firstly require some of the weights (provided) adding to it, to re-instate the
correct "lift".
To do this, place the new top temporarily where the SS one used to be: ↓
Then open the front plate as shown below: ↓
Info:
These fixings are
>
T20 star screws
You can now add the required amount of extra weight into the recess, until you are happy
with its pace of lift (when the new top is added more permanently later)
Take the New Top off and introduce the S-Box unit into its rebated hole.
NB. In "CHAMELEON" Models this
tape is already be fitted for you →
>
Apply good quality double-sided
tape (e.g. 3M) to the plate ↗
>
Advertisement
