Proline Prosonic Flow 93W Technical Information

Technical Information

Proline Prosonic Flow 93W
Ultrasonic flow measuring system
Volume flow measurement for standard applications
with drinking water, wastewater and process water
Applications
The sensors are perfectly suited for the non-contact
measurement of pure or slightly contaminated liquids,
regardless of the pressure or electrical conductivity.
• Suitable for pipe diameters up to DN 15 to 4000
to 160")
(
½
• Can be used with all metal and plastic pipes lined or
unlined and with composite pipes
• Ideal solution for applications with water, e.g. drinking
water, industrial water, wastewater, saltwater,
deionized water, cooling water and heating water
• Perfectly suitable for
– retrofit measurement
– flow monitoring
– improving measuring points
• Interface for easy integration into all common
distributed control systems:
– HART
– PROFIBUS DP/PA
– FOUNDATION Fieldbus
TI00084D/06/EN/13.11
71136723
Features and benefits
The Prosonic Flow ultrasonic clamp-on system allows
accurate and cost-effective flow measurement from
outside the pipe and without the need to interrupt the
process. The flow measurement is bidirectional and
causes no pressure loss.
• Easy, safe and menu-guided sensor mounting ensures
precise measuring results
• Long-term system integrity thanks to robust sensor
and industrial mounting kit design
• Automatic frequency scan for optimized installation
and maximum measuring performance
• IP 68 for pipes under water
• Also available as insert version
• Can also be supplied as two-path system for short
inlet runs
• Remote configuration using Endress+Hauser's
FieldCare software