Tune To Fm Radio Stations; Program Radio Stations - Philips DCM2020 User Instruction

Charge the iPod/iPhone/iPad
When the unit is connected to power, the
docked iPod/iPhone/iPad starts charging.
Tip
‡
For certain iPod models, it may take up to a minute
before the charging indication appears.
Remove the iPod/iPhone/iPad
1
Unload the iPod/iPhone/iPad from the
dock.
2
Flip down the lid to hide the dock.
6 Listen to FM
radio

Tune to FM radio stations

Note
‡
Ensure that you have connected and fully extended the
supplied FM antenna.
1
Press FM.
2
Press and hold /
station.
3
When the frequency starts to change,
release the button.
» The FM tuner tunes to a station with
strong reception automatically.
4
Repeat steps 2-3 to tune to more stations.
To tune to a weak station:
Press / UHSHDWHGO\ XQWLO \RX ÀQG RSWLPDO
reception.

Program radio stations

automatically
Note
‡
You can program a maximum of 20 preset radio
stations.
1
In FM tuner mode, press PROG/CLOCK
SET for 3 seconds to activate automatic
programming.
» [AUTO] DXWR LV GLVSOD\HG
» The unit stores all the FM radio
stations automatically and then
EURDGFDVWV WKH ÀUVW SUHVHW UDGLR
station.
to tune to a radio
EN 15