Table of Contents
Advertisement
OPERATION
DETACHABLE CORD
See figures 9 - 10.
The detachable cord can be easily stored or replaced quickly
if damaged.
To detach:
Push cord lock button forward and hold.
Twist cord fully counterclockwise and pull away from the
saw.
To reattach:
Align notch in the saw cord receptacle with the ridge in
the cord head.
Insert cord head into cord receptacle and twist fully
clockwise.
NOTE: You will hear a click when the cord is securely
attached to the saw.
STARTING/STOPPING THE SAW
See Figure 11.
To start the saw: Depress the switch trigger.
Always let the blade reach full speed, then guide the saw
into the workpiece.
WARNING:
The blade coming in contact with the workpiece
before it reaches full speed could cause the saw to
"kickback" toward you, resulting in serious injury.
To stop the saw: Release the switch trigger.
After you release the switch trigger, allow the blade to
come to a complete stop. Do not remove the saw from the
workpiece while the blade is moving.
CORD LOCK
BUTTON
TO DETACH
15
DETACHABLE
CORD
TO REATTACH
SWITCH
TRIGGER
Fig. 9
Fig. 10
Fig. 11
Advertisement
Table of Contents
