Features - RIDGID R3120 Operator's Manual

FEATURES

Before using the orbital jig saw, familiarize yourself with all
operating features and safety requirements. However, do
not let familiarity with the tool make you careless.
WARNING:
Exercise caution when using this tool. Careless
actions, for even a fraction of a second, can result
in serious personal injury.
Your new orbital saw is equipped with the following features.
See Figure 1 .
Switch
The orbital jig saw has a conveniently-located trigger
switch.
Lock-On Button
The lock-on button allows continuous operation.
VACUUM ATTACHMENT
SPLINTER
GUARD
CHIP SHIELD
SAW BLADE
Recessed Blade-Support Roller
Recessed blade-support roller ensures accurate cutting.
Five-position adjustable orbital saw-blade movement to
ensure high cutting performance. Hard-wearing die-cast
aluminum casing with good heat dissipation properties to
protect against overheating.
Chip Shield
A clear plastic chip shield has be provided on the front of
your saw for protection against flying dust and chips. It is
designed to fit the front opening of your saw. For your
protection, do not use saw without chip shield properly
in place.
Vacuum Attachment
A vacuum attachment is packed with your saw. Used in
conjunction with the chip shield, it will yield the highest
dust efficiency. This attachment is convenient when
operating your saw for an extended period of time.
LOCK-ON BUTTON
SWITCH
ORBITAL ADJUSTMENT
8
VARIABLE SPEED
CONTROL SELECTOR
KNOB
Fig. 1