Do you have a question about the WFC5 and is the answer not in the manual?
Questions and answers
Rose
April 28, 2025
The water in our Hellar benchtop filter suddenly looks milky- no smell-What is this.
1 comments:
Mr. Anderson
May 15, 2025
Milky water in a HELLER WFC5 benchtop filter can be caused by air bubbles or an air lock inside the tubing or unit.
This answer is automatically generated
Michell Maklary
April 16, 2025
water is leaking out under bottom water chamber. I have emptied both chambers and put in new filter. every time I fill the chambers they leak after a while. I have checked the plug underneath and it is sealed.
1 comments:
Mr. Anderson
May 9, 2025
Water leaking from the bottom water chamber of the HELLER WFC5 after filling it could be caused by the drain plug underneath the unit not being fully closed or sealed. Check that the drain plug is properly closed and sealed to prevent leakage.
BEFORE FIRST USE Read and follow all the instructions in this User Manual even if you feel you are familiar with the product, and find a place to keep it handy for future reference. For your convenience record the complete model number (located on the product identification plate) and the date you received the product, together with your purchase receipt and attach to the warranty and service information.
Page 3
Filter replacement is essential for the product to perform as represented. It must be replaced at least every 3 months. This appliance has been designed to be used continuously. FEATURES 1. Drip Tray 2. Body 3. Chilled Water Tap 4.
Page 4
Flushing the dispensing system: It is important to rinse out the dispensing system before starting to use your appliance: 1. Put the base water tank onto the water cooler; ensure that the tank sits into the slots located in top of the water cooler.
Page 5
OPERATIONS Using your Water Cooler: 1. Remove Filter Cartridge from plastic; make sure not to lose the Filter Cartridge O-Ring. Immerse Filter Cartridge in ambient water for 20 minutes. Shake filter underwater to remove any excess black carbon particles and trapped air. NOTE: You may see small amounts of black particles at times;...
Emptying the internal tank Switch off the unit and unplug from the mains supply. Turn the unit upside down to reveal a drain plug located in the centre of the base. Remove the spring clip securing the silicone cap to the drain and remove the silicone cap. ...
Filtered Water Chamber Air bubble/ Air lock inside tubing or Call customer service for unit. instructions SPECIFICATIONS Model WFC5 Description Water Filter Cooler Voltage & Frequency 220-240Vac, 50/60Hz Wattage 75 Watts Filter Cartridge Replacement Model (Pack of 3)
CUSTOMER SERVICE Australian Customer Service GAF Control (Sales) Pty Ltd P.O Box 19 Altona North Victoria 3025 Phone: 1300 659 489 Hours: 9am-5pm (EST) Mon-Fri www.gafcontrol.com.au *This product may vary slightly to the product illustrated due to ongoing product development.
Need help?
Do you have a question about the WFC5 and is the answer not in the manual?
Questions and answers
The water in our Hellar benchtop filter suddenly looks milky- no smell-What is this.
Milky water in a HELLER WFC5 benchtop filter can be caused by air bubbles or an air lock inside the tubing or unit.
This answer is automatically generated
water is leaking out under bottom water chamber. I have emptied both chambers and put in new filter. every time I fill the chambers they leak after a while. I have checked the plug underneath and it is sealed.
Water leaking from the bottom water chamber of the HELLER WFC5 after filling it could be caused by the drain plug underneath the unit not being fully closed or sealed. Check that the drain plug is properly closed and sealed to prevent leakage.
This answer is automatically generated