Table of Contents
Advertisement
Quick Links
FEATURES
•
Uses the exclusive Micro-computer LSI circuit and crystal
time base for highly accuracy measurements
•
A high power of emission and a broad band of receiving
sensitivities make it easy to measure the rough surfaces
such as cast iron
•
Widely used in a large variety of industries
•
Capable of measuring the thickness of many materials
including steel, cast iron, aluminum, red copper, brass,
zinc, quartz glass, polyethylene, PVC, gray cast iron and
nodular cast iron
•
Automatic power off to conserve battery life
•
Can communicate with PC computer for downloading
statistics and printing using an optional cable and
software package
•
Large selection of pre-programmed materials and sound
velocity values for convenient use
•
Automatic and manual shutdown functions
•
Coupling quality icon
•
Bluetooth data output choice
COMPONENTS
Standard
•
Handheld Display
•
Transducer
•
Acoustic Couplant
•
Carrying Case
•
Manual
TTM-UM-00434-EN-04 (April 2017)
Ultrasonic Thickness Gauge
WT-2 Pipe Wall Thickness Gauge
Ultrasonic
Transducer
SPECIFICATIONS
Display
Resolution
Range
Accuracy
Sound Velocity Range
Environmental
Display Units
Power Supply
Size
Weight
Power
Switch
Coupling
Established
Icon
Display
Calibration
Key
Up
Arrow
Power
Switch
RS232
Connection
Figure 1: Gauge description and controls
Four digits, 0.4 in. (10 mm) LCD
0.004 in. (0.1 mm)
0.0475...7.875 in. (1.2...200 mm) (45#
steel)
±0.03 inch (0.76 mm)
3281...29,528 fps (1000...9000 mps)
Temperature
32...122° F (0...50° C)
Humidity
<80%
Inches and millimeters
Four 1.5V AAA (UM-4 Battery)
5.52 x 2.25 x 1.18 in.
(140 x 70 x 30 mm)
9.2 oz (260 g) not including batteries
Transducer
Connections
Calibration
Stage
mm
inch
Units
Selection
Down
Arrow
Velocity
Key
Material
Selection
User Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Badger Basket WT-2
Summary of Contents for Badger Basket WT-2
-
Page 1: Specifications
Ultrasonic Thickness Gauge WT-2 Pipe Wall Thickness Gauge FEATURES • Uses the exclusive Micro-computer LSI circuit and crystal time base for highly accuracy measurements • A high power of emission and a broad band of receiving sensitivities make it easy to measure the rough surfaces such as cast iron •... -
Page 2: Measuring Procedure
Material Selection MATERIAL SELECTION 1. Press either Power switch to turn on the unit. 2. Press SELECT. The display shows the code cdxx or xxxx. The cd is an abbreviation for code and xx is a number between 01…11 corresponding to a particular pipe material. xxxx is a four-digit user-defined material sound velocity. 3. -
Page 3: Battery Replacement
Measuring Using a Known Velocity MEASURING USING A KNOWN VELOCITY 1. Press VEL. The display shows the last pipe sound speed velocity used. 2. Set the known pipe velocity by pressing in velocity mode. OTEE: Every press increments or decrements the velocity by 32.8 fps (10 mps). To change the velocity in 328 fps (100 mps) jumps, press and hold for more than four seconds. - Page 4 Ultrasonic Thickness Gauge, WT-2 Pipe Wall Thickness Gauge Control. Manage. Optimize. Dynasonics is a registered trademark of Badger Meter, Inc. Other trademarks appearing in this document are the property of their respective entities. Due to continuous research, product improvements and enhancements, Badger Meter reserves the right to change product or system specifications without notice, except to the extent an outstanding contractual obligation exists.
Need help?
Do you have a question about the WT-2 and is the answer not in the manual?
Questions and answers