Teledyne Lecroy BPA Quick Start Manual

Computer System Requirements

Supported Systems
Operating System: Windows 7/8/10
l
USB:USB 2.0 and later
l
Minimum Requirements
Processor: Core i5 at 2.7 GHz
l
RAM: 4 GB
l
Free Hard Disk Space on C: drive: 20 GB
l

1. Connecting/Powering

Insert the USB cable mini-connector into the USB port on the Frontline BPA low energy
hardware.
Insert the other end of the USB cable into the PC.

2. Select Data Capture Method

Now that the Frontline BPA low energy hardware is powered up , the next step is to
open Frontline BPA low energy software and select the data capture method.
Open "Frontline [version #]" from the Start menu or from the Desktop folder.
Select "Frontline ComProbe Protocol Analysis System".
The Select Data Capture Method dialog appears.
Select
Bluetooth low energy
The ComProbe BPA low energy analyzer's
menu select
Options I/O Settings
Frontline Technical Support: Phone +1-434-984-4500 or email tech_support@fte.com
and click .
Run
window will open. From the
Control
or click on the toolbar.
Quick Start

Install Software

From Download: Download the latest ComProbe installer
l
from FTE.com. Once downloaded, double-click the
installer and follow the directions.
http://www.fte.com/bpale-soft
Guide