Hamilton HA-1000 Installation Instructions Manual page 3

Step#5
Remove ALL silicone from tube frame. See Arrow.
Note: This must be cleaned so that top Door Bearing
rest flat under top plate.
17
K
Step#7
Replace Upper Door Ring with part in kit.
New ring has cylinder retained by screw for detent.
32
K
22
Step#6
Mount NEW spacer nuts to bottom plate using
existing screws.
2
K
3
3
K
2
10
Step#8
Replace upper and lower Door Bearings with
parts in kit. Note: Make sure only one Bearing
Race is used on top and bottom of door.
3