Features And Parts Lists - Ametek T Operation Manual

„ „ „ „ „

FEATURES AND PARTS LISTS

Type T Series hand pumps may be ordered with either oil or a water/alcohol mixture as the pressure medium. There are three available seal packages for the
system: Buna-N, Viton®, and EPT.
All Type T Series hand pumps feature a vent valve, and dual volume control for rapid pressure increase at lower pressures and easier pumping at higher
pressures. T-1, T-2, and T-3 models include a dual pressure port manifold with fine adjust, plus replacement o-rings and a set of service tools.
Refer to Figure 3 on page 25
for more details on the included tools.
T-1 and T-2 – Included Parts
Reference and Device Under Test Pressure Ports
X
Part Number Description
T-134 15/16-20 Male to 1/4" NPT Female Adapter
T-135 15/16-20 Male to 1/2" NPT Female Adapter
T-1-CPF – Included Parts
Reference and Device Under Test Pressure Ports
X
Part Number Description
5255 CPF Male to 15/16-20 Male Adapter (2)
4715 MP Female to 1/4" Female NPT Fitting
T-3 – Included Parts
Reference and Device Under Test Pressure Ports
X
Part Number Description
T-134 15/16-20 Male to 1/4" NPT Female Adapter
T-135 15/16-20 Male to 1/2" NPT Female Adapter
*
– Set of 4 Test Gauges
*
For more details refer to T-3 Pumps for Hydraulic Comparator Kits on page 2
and to Figure 4 on page 26.
Check Valve Plug
Valve Rod Selector
Pump Handle
Reservoir Tube
Overview
Fine Adjust
CPF Fitting NPT Union Body
Manifold Assembly
Fill and Vent Relief Plug
Vent Valve
Check Valve Plug
Type T Pump Operation Manual
3
